耐電弧試驗機（計算機控制）ZDH-20KV

ZDH-20KV耐電弧試驗機是按照GB1411 、IPC650、IEC61621、ASTMD495設計制造，

并符合JEC149、UL746A等試驗方法。應用于電機、電器和家用電器等行業的電工用塑料、樹脂膠和絕緣漆等絕緣材料的耐電弧性能評定。主要適用于固體絕緣材料如：塑料、薄膜、樹脂、云母、陶瓷、玻璃、絕緣油、絕緣漆、紙板等介質的耐電弧性能測試；耐電弧試驗機采用計算機控制，試驗過程中可在線觀察試驗曲線；自動存儲試驗條件及試驗結果等數據，并可存取、顯示、打印.

一、主要技術要求：

二、主要配置：

Arc resistance testing machine (computer control) ZDH-20KV

ZDH-20KV耐電弧試驗機是按照GB1411 、IPC650、IEC61621、ASTMD495設計制造，

ZDH-20KV arc resistance testing machine is manufactured in accordance with GB1411, IPC650, IEC61621, ASTMD495 design,

并符合JEC149、UL746A等試驗方法。應用于電機、電器和家用電器等行業的電工用塑料、樹脂膠和絕緣漆等絕緣材料的耐電弧性能評定。主要適用于固體絕緣材料如：塑料、薄膜、

And in accordance with the test methods of JEC149, UL746A etc.. Arc resistant performance evaluation is applied to the motor, electric appliances and household appliances industries such as electrical plastic, resin and other insulating material insulating paint. Mainly applicable to solid insulating materials such as: plastic, thin film,

樹脂、云母、陶瓷、玻璃、絕緣油、絕緣漆、紙板等介質的耐電弧性能測試；耐電弧試驗機

Resin, mica, ceramic, glass, insulating oil, insulating paint, paper and other media of the arc resistance test; arc resistance test machine

采用計算機控制，試驗過程中可在線觀察試驗曲線；自動存儲試驗條件及試驗結果等數據，

Adopt computer control, test process online observation test curve; automatic storage test conditions and test results,

并可存取、顯示、打印.

And can access, display, print.

一、主要技術要求：

One, main technical requirements:

編號 技術要求 參數

Numbering technique required parameters

01 輸入電壓 交流 220 V

01 input AC voltage of 220 V

02 輸出電壓 交流 0--12.5 KV

The 02 output voltage AC 0--12.5 KV

03 電器容量 3 KVA

03 electric capacity of 3 KVA

04 試驗方式 間歇電弧，連續電弧

04 test methods for intermittent arc, arc

05 試驗電流 10MA-20MA-30MA-40MA可選

05 the test current 10MA-20MA-30MA-40MA optional

06 試驗電壓控制誤差 ≤ 1％

06 the test voltage control error is less than 1%

07 電弧通斷時間誤差 <5ms

07 arc on-off time error <5ms

08 試驗電壓連續可調 0--12KV

08 the test voltage continuously adjustable 0--12KV

09

09

電極規格 不銹鋼板狀電極 25.4mm*12.7mm*0.15mm

Standard Specification for stainless steel plate electrode and 25.4mm*12.7mm*0.15mm electrode

鎢鋼電極直徑 2.5mm*70mm

Tungsten electrode diameter 2.5mm*70mm

電極配置角110度

Electrode configuration angle of 110 degrees

電極重量：50G

The weight of the electrode: 50G

10 安全防護措施 （1）超壓保護

10 measures of safety protection over voltage protection (1)

（2）過流保護

(2) the overcurrent protection

（3）短路保護

(3) short circuit protection

（4）安全門開啟保護

(4) the safety door opening protection

（5）軟件誤操作保護

(5) software protection misoperation

二、主要配置：

Two, the main configuration:

編號 配置 數量

Number number

01 試驗主機 一臺

The 01 test a host

02 2萬伏高壓發生器 一臺

A 220000 volt high-voltage generator

03 全自動微電腦電壓調壓裝置 一套（串口方式）

03 full automatic microcomputer voltage regulating device with a set of (serial)

04 電壓采集及電流采集隔離式變送裝置 一套

The 04 voltage and current acquisition isolation type transmission device, a set of

05 試驗電極 兩套

05 two sets of test electrode

06 放電棒 一只（樹脂式）

The 06 discharge rod a (resin type)

07 計算機耐電弧測控軟件 一套

07 arc resistance measurement and control software of a computer

08 計算機 一套（電腦）

08 computer a (special computer)

09 彩色噴墨打印機 一臺（惠普品牌）

09 color ink jet printer a (HP brand)

10 程序光盤 一套

10 disc set

11 產品使用說明書 一份

11 using a manual

12 合格證 一份

12 a certificate

13 隨機工具 一套

13 random set of tools